INA PASE1-7/16 Bearing units

Basic Dynamic Radial Load Rating C:186000 N; d:105.000 mm; Oil Speed Rating n2:2800 rpm; D:190.0000 mm; B:65.10 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:180000 N; Grease Speed Rating n1:1800 rpm; Sealed Speed Rating n3:1800 rpm; Accessories:Two Shields;

d2:35 mm; Static (Coa):48.2 kN; E:64 mm; D:72 mm; b1:7 mm; Dynamic (Ca):51.1 kN; B:17 mm; s:1.4 mm; rs (min):1.1 mm; b:4 mm;

Basic Static Radial Load Rating Co:65500 N; Fillet Radius ra:2.00 mm; d:55.000 mm; D:120.0000 mm; Basic Dynamic Radial Load Rating C:79200 N; Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:4600 rpm; Oil Speed Rating Open/Shielded n2:5600 rpm; B:29.00 mm;

Fillet Radius ra:2.00 mm; d:60.000 mm; Accessories:Shield & Seal; Basic Dynamic Radial Load Rating C:121000 N; D:130.0000 mm; Basic Static Radial Load Rating Co:95000 N; B:57.20 mm; Grease Speed Rating n1:3400 rpm; Oil Speed Rating n2:4500 rpm; Sealed Speed Rating n3:3400 rpm;

Basic Dynamic Radial Load Rating C:72800 N; Grease Speed Rating n1:4500 rpm; Oil Speed Rating n2:6000 rpm; Sealed Speed Rating n3:4500 rpm; d:45.000 mm; Basic Static Radial Load Rating Co:53000 N; D:100.0000 mm; Accessories:One Shield; Fillet Radius ra:1.50 mm; B:42.90 mm;

P60°:61.4 kN; Stabilizing ring:SR-17-14; H1:95.25 mm; Cap bolt:2 x 5/8-11 UNC; End plug (suffix Y):EPR 9; L:330.2 mm; RG:3/8 NPT; Max. speed for Taconite seal:1050 r/min; Appropriate attachment bolt size G:0.625 in; N1:19.05 mm;

Reference speed:1800 r/min; d2 ≈:225 mm; Limiting speed:2400 r/min; G1:18 mm; Basic dynamic load rating C:930 kN; Da min.:254 mm; D1 ≈:266 mm; Basic static load rating C0:1460 kN; Mass bearing + sleeve:20.5 kg; B:75 mm;

Accessories:One Shield; d:75.000 mm; Grease Speed Rating Open/Shielded n1:4300 rpm; Sealed Speed Rating n3:2800 rpm; Grease Speed Rating n1:4300 rpm; Oil Speed Rating n2:5000 rpm; Oil Speed Rating Open/Shielded n2:5000 rpm; B:37.00 mm; D:160.0000 mm; Fillet Radius ra:2.00 mm;

a:43 mm; r3,4 min.:3 mm; Calculation factor Y0:0.4; Mass bearing pair:4.78 kg; Calculation factor e:0.88; B:76.5 mm; da max.:77 mm; db min.:78 mm; rb max.:3 mm; Da max.:118.5 mm;

Mass pillow block:94.8 kg; Pa:40 kN; N1:28.575 mm; Ca:102.794 mm; PG:1/4 NPT; Labyrinth ring:2 x LOR 146; H2:66.675 mm; da:160.338 mm; Housing:SAF 036 KA; L:558.8 mm;

GN:1/4-28 SAE-LT; Rα:45 °; Recommended diameter for attachment bolts, inch G:0.625 in; SWN:7 mm; B4:9 mm; J:184 mm; J6:154 mm; Housing material:Cast iron; T:63.5 mm; Db2:127 mm;

Grease:0.230 kN; D:72 mm; with cylindrical bore:11 000 min-1; Static (Cor):16.270 kN; rs Dynamic (Cr):1.1 mm; Oil:9 400 min-1; B:17 mm; with tapered bore:1207  ; B1:mm; d:35 mm;

P180°:38.3 kN; P60°:94.3 kN; J max.:333.375 mm; H:222.25 mm; Mass pillow block:33.9 kg; Initial grease fill:181.44 g; Ca:69.799 mm; P150°:32 kN; Cap bolt recommended tightening torque:515.2 N·m; ba:48.419 mm;

G:M 24x2; h1:94 mm; d4 ≈:35 mm; l7 min.:30 mm; l3 min.:36 mm; d2 max.:65 mm; w:30 mm; Basic dynamic load rating C:137 kN; Basic static load rating C0:90 kN; B:20 mm;

Grease Speed Rating n1:11000 rpm; B:17.00 mm; Basic Static Radial Load Rating Co:13700 N; d:25.000 mm; Fillet Radius rb:0.60 mm; Oil Speed Rating n2:14000 rpm; D:62.0000 mm; Basic Dynamic Radial Load Rating C:21200 N; Fillet Radius ra:1.00 mm;